Fabric bucket tutorial

19 Nov

By demand… here’s a tutorial for fabric buckets. I saw something similar on my favorite blog: http://www.soulemama.com, and naturally I bought the pattern she used, but still have not received it so I decided to make some of my own. I have NO idea if this is how they are made or not, but this is my interpretation and I totally “winged” the first one (the blue stripey) which came out quite well if I do say so myself. So without further ado here’s how to make them.

You will need:
1 30×18 inch piece of heavy canvas
1 30×18 inch piece of cotton batting
1 30×18 inch piece of your outer fabric
2 3x 9 inch pieces of handle fabric (I used canvas for the wool bucket and the outer fabric for the other two)

Cutting mat
rotary cutter
scissors
iron
sewing machine
thread

Cut your pieces 

I made the handles out of the left over end piece

Cut batting 

Lay batting over canvas, with “right sides” (the canvas) together, fold and sew down side and bottom

Seaming….. 

Trim away excess. this stuff is BULKY and we don’t want too much

Seam the outer piece and clip corners

 To square off the bottom, line up side seam (and side fold) with bottom seam and press, then, use your ruler thingy to make a triangle, I use the 45 degree angle that is built into mine- in brings the side in about 3 inches from the corner. Repeat on the canvas and batting.

While you are at the ironing board, make the handles….

You will sew this together- I like a zig zag right over that crease

Fold the bottom up wide and fold the top down narrow, then fold the top over to enclose raw edges

Sew along your mark and cut off the triangle

Here’s the tricky part…. Take both pieces and put them right sides together matching the side seem and corners. Sandwich your handles between the pieces, leaving an inch or so sticking up. Make sure they are equi-distant from the sides and match each-other. Pin all the way around, then sew leaving a good size opening (I like leaving the side between handles open) to turn. 

Turn the whole thing right sides out

Stuff the canvas inside the outer piece. Bring it over to the ironing board and press your seam allowance in where your opening was and press all the way around.

Top stitch all the way around… 

Fluff and stuff!

That’s it! Now you have a bucked for all sorts of stuff. Mine are holding fabric scraps, but I’m going to make a few for toys and for the boys’ room. 

I hope it all made sense! lol

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: